How to Install Blink Doorbell: A Step-By-Step Guide

How to Install Blink Doorbell: A Step-By-Step Guide

When it comes to home security devices, the Blink doorbell has emerged as a popular choice for its convenient features and easy installation process. In this blog, we will cover how to install a Blink doorbell and answer some frequently asked questions about the installation process.

Unboxing and Getting Ready for Installation

Upon purchasing your Blink doorbell, the first step is to unbox the device and check the contents. You should find the doorbell, mounting bracket, screws, and possibly a tool for tightening the screws.

Before you proceed with the physical installation, you will need to set up the doorbell using the Blink app. the following steps: Get the Blink app from Google Play or the Apple Store.

To create your account, open the app and adhere to the setup steps.

Select “Add a Device” after creating your account, then follow the on-screen directions to add the Blink doorbell to your account.

The physical installation of your Blink doorbell can vary based on your specific requirements. We will explain the general installation process, how to install the Blink doorbell on a brick surface, and how to install it without drilling.

General Installation

  • Choose the spot where you want to install the doorbell. This should be near your front door and within reach of your home’s Wi-Fi signal.
  • Use the mounting bracket as a guide to mark the spots where the screws will go.
  • Drill holes at the marked spots and insert the wall plugs provided.
  • Screw the mounting bracket into place.
  • Attach the Blink doorbell to the mounting bracket.


Installing a doorbell on brick might seem daunting, but it’s pretty straightforward. Follow these steps:

  • Choose the spot where you want to install the doorbell.
  • Using the mounting bracket as a guide, mark the spots where the screws will go.
  • Use a masonry drill bit to drill holes at the marked spots.
  • Insert the provided wall plugs into the drilled holes.
  • Screw the mounting bracket into place.
  • Attach the Blink doorbell to the mounting bracket.


If you’re looking to install your Blink doorbell without drilling, you can use adhesive strips or strong outdoor-grade double-sided tape.

To make sure that the area is free of moisture and filth, clean the area where the doorbell will be installed.

Apply the adhesive strips or tape to the back of the mounting bracket.

Hold the mounting bracket firmly in position against the wall for a few seconds.

Attach the Blink doorbell to the mounting bracket.

Remember, this method is not as secure as drilling, so it’s best used on covered porches or areas not exposed to severe weather conditions.

If you have an existing doorbell, you might want to connect your Blink doorbell to it. Here’s how:

  • Disconnect the wires from your existing doorbell.
  • Connect these wires to the terminals on the back of the Blink doorbell.
  • If the wires are too short, you can use the wire extenders provided with the Blink doorbell.
  • After connecting the wires, attach the Blink doorbell to the mounting bracket as explained above.
  • Please note, while the Blink doorbell can work with existing doorbell wiring, it’s designed to operate wirelessly and may not support all the features of wired doorbell systems.

FAQs

How do I attach the Blink doorbell?

The Blink doorbell attaches to a mounting bracket that you screw into the wall. If you prefer a non-drilling method, you can use adhesive strips or double-sided tape.

Can I install Blink doorbell without drilling?

Yes, you can install the Blink doorbell without drilling by using adhesive strips or double-sided tape.

How do you install a Blink doorbell on Brick?

To install a Blink doorbell on brick, you will need to use a masonry drill bit to drill holes for the screws. Once you’ve drilled the holes, you can screw the mounting bracket into place and attach the doorbell.

How to install Blink doorbell to existing doorbell?

By unplugging the wires from your old doorbell and attaching them to the terminals on the back of the Blink doorbell, you may attach the doorbell to an existing doorbell.

How to install Blink doorbell without screws?

You can install the Blink doorbell without screws by using adhesive strips or double-sided tape to attach the mounting bracket to the wall.

Conclusion

Learning how to install a Blink doorbell can help enhance the security of your home. With the help of this guide, you should be able to install the device on your own, whether you’re mounting it on brick, attaching it without drilling, or connecting it to an existing doorbell. Remember, if you face any challenges during installation, don’t hesitate to reach out to Blink’s customer support for assistance. Happy installing!

Follow for more informative blogs. Click Here!

Blink Doorbell. Click Here!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *